Fechar

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16d.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP7W/36HQ6QE
Repositóriosid.inpe.br/mtc-m19@80/2009/12.10.15.38   (acesso restrito)
Última Atualização2009:12.10.15.38.08 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m19@80/2009/12.10.15.38.09
Última Atualização dos Metadados2018:06.05.04.36.01 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1016/j.apsusc.2009.09.001
ISSN0169-4332
Chave de CitaçãoMelloUedaLepiReut:2009:TrChSS
TítuloTribological changes on SS304 stainless steel induced by nitrogen plasma immersion ion implantation with and without auxiliary heating
Ano2009
MêsDec.
Data de Acesso04 maio 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho375 KiB
2. Contextualização
Autor1 Mello, Carina Barros
2 Ueda, Mário
3 Lepienski, C. M.
4 Reuther, H.
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHSB
Grupo1 LAP-CTE-INPE-MCT-BR
2 LAP-CTE-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Universidade Federal do Paraná
4 Institute of Ion Beam Physics and Materials Research
RevistaApplied Surface Science
Volume256
Número5
Páginas1461-1465
Nota SecundáriaB2_ASTRONOMIA_/_FÍSICA B2_CIÊNCIAS_BIOLÓGICAS_I B2_CIÊNCIAS_BIOLÓGICAS_II B1_ECOLOGIA_E_MEIO_AMBIENTE B1_ENGENHARIAS_II A2_ENGENHARIAS_III B1_ENGENHARIAS_IV A2_INTERDISCIPLINAR B2_MATEMÁTICA_/_PROBABILIDADE_E_ESTATÍSTICA B1_MATERIAIS B1_MEDICINA_III B1_ODONTOLOGIA B3_QUÍMICA
Histórico (UTC)2009-12-10 15:38:41 :: simone -> administrator ::
2018-06-05 04:36:01 :: administrator -> marciana :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChavePlasma immersion ion implantation
SS304
Tribology
ResumoIn order to achieve quite thick treated layers with reasonable thickness uniformity in SS304 steel, the plasma immersion ion implantation (PIII) process was run in high-temperature, up to 350 °C, to induce high thermal diffusion but avoid the white layer formation. In these experiments, we heated the sample-holder with a shielded resistive wire properly wound around it and subjected the SS samples to nitrogen glow discharge PIII with relatively low voltages (10 kV) in different temperatures. We also treated the SS samples by the traditional PIII method, slowly increasing the high voltage pulse intensities, until 14 kV at the end of processing, reaching temperatures of up to 350 °C. These modes of treatments were compared with respect to nitrogen implantation profiles, X-ray diffraction, tribology and mechanical properties. X-ray diffraction results indicated a much higher efficiency of auxiliary heated PIII mode compared to the ordinary PIII. Very prominent ãN peaks were observed for the first mode, indicating large concentration of nitrogen in thick layers, confirmed by the nitrogen profiles measured by GDOS and AES. Improved mechanical and tribological properties were obtained for SS304 samples treated by the PIII with auxiliary heating, more than for ordinary PIII. Hardness was enhanced by up to 2.77 times, as seen by nanoindentation tests.
ÁreaFISPLASMA
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Tribological changes on...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvotribological changes.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Repositório Espelhosid.inpe.br/mtc-m19@80/2009/08.21.17.02.53
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; COMPENDEX.
Acervo Hospedeirosid.inpe.br/mtc-m19@80/2009/08.21.17.02
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel documentstage e-mailaddress electronicmailaddress format isbn label lineage mark nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 


Fechar